H3000M (Fast Speed UV Inkjet)

Ink curing system operates with water-cooling Led UV lamps, which is with longer lifetime, more silent operation,  never make ozonic gas and emit less heat comparing with traditional mercury lamps. It enables user to have more media choices, printings on sensitive or non-sensitive materials and printings withvarnish implementation as well as to save energy, costs and time. With the use of VOC (Volatile Organic Compounds) the UV curable ink is environmental friendly and no bad smell. Drawer-type UV lamp cassette makes it easy to replace the lamps when needed. DOCAN Unique 5 dgree BANK Angle design avoids heads' harm.  

The vacuum table is for accurate feeding the medias. The maximum material width is 320 cm and length is 200 cm. Table with pneumatic collapsable linear alignment pins is for easily position the rigid medias. Air compressor connection is required to operate the system. X axis has 5 and Y axis has 4 pins.

Two Powerful vacuum pumps is for 4-zone air suction of the vacuum table. With respective control buttons, a pedal switch makes it capable reverse air blowing function for lifting the heavy medias easily(Optional). The Honey-Comb table and internal air pipe ducts for efficient and powerful distribution of vacuum effect. 

Equipped with linear motor in higher precision, efficiency and stability, Japanese THK silent guide rail and X axial metal raster ensures straight carriage moving to achieve accurate printing and posibility of high driving speed. Y Asix is driven by dual Delta motor belt system with Metal raster, which can control deviation within 1um. 

Automatic high-volume Ink Supply system ensures continuous printing. The white ink has automatic stirring and circulation system, which avoids the clog of white printhead. The system continuously circulates the ink between Sub Ink Tank, Main tank and internal main tank. It's equipped with Ink low level sensor, which can give users alarm once ink level is below than setting.

Can print on up to 100mm thick substrates and the printing distance between the table and  printhead can be raised more up to 200mm with an optional adaptor to print on thicker materials. It is possible to print on heavy substrates up to 100kg weight.

ONYX RIP Center is a standard software for Kyocera engine, which provides the control and simplicity need to get start in wide-format print production and achive consistent high-quality output. The versatile tools in ONYX RIP Center software make it easy to prepare jobs and produce sellable prints faster.

Example Applications