H3000RLM (Large UV Combo Printer)
H3000RLM is a combo uv printer.The flatbed part 3.2*2.5m is larger than H300RM 3.2*2m, which is the main difference between this two combo uv printer. The roller printing size is the same 3.2m*unlimited. It has great versatility to print out soft and rigid media stably. The printhead are Konica 1024i,Ricoh g5/g6,Kyocera kj4a,Match with our special print functions which make the printing more realistic annd delicate.
H3000RLM Series uv flatbed and roll combo Digital UV Printer
Printing Size: 3.2 x 2.5m+3.2m*unlimited
Media Thickness: 100mm
Ink Type: UV Ink
Curing System: UV LED(water cooling)
Rip Software: Sai/ ONYX
Print Head control: Temperature and Valtage control by Waveform
Operation Environment: Temp. 20℃-28℃; Humidity 40%-60%
Power Supply: 50/60Hz 220V(10%) > 30A Single PHase
Image Outdoor Lifespan: 2 Years(Base on DOCAN Ink)
Dimention:5570x3860x1500mm; 2350Kgs; Crate size: 5780x2320x1880mm + 4160x2160x1380mm
Warranty: 12 months after install
Print Head Options
Ink Curing System
Ink curing system operates with water-cooling Led UV lamps, which is with longer life time, more silent operation, never make ozonic gas and emit less heat comparing with traditional mercury lamps. It enables user have more media choices, printings on sensitive or non-sensitive materials and printings withvarnish implementation as well as to save energy, costs and time. With the use of VOC (Volatile Organic Compounds) the UV curable ink is environmental friendly and no bad smell. Drawer-type UV lamp cassette makes it easy to replace the lamps when needed. DOCAN Unique 5 dgree BANK Angle design avoids heads' harm.
Vacuum Table & Registration Pin
Combining sheet-to-sheet with roll-to-roll printing functions, a large-sized vacuum table is for accurate feeding the medias. The maximum material width is 320 cm and length is 205 cm. Table with pneumatic collapsable linear alignment pins is for easily position the rigid medias. Air compressor connection is required to operate the system. X axis has 5 and Y axis has 4 pins. H3000RLM can easily switch from flatbed to roll-to-roll mode with a click from the software.
Inflatable winding roller for releasing and collecting the flexible medias. Roller tension control panels on the front frame is to adjust the rotational speed.
5-zone Air Suction and Reverse
Two Powerful vacuum pumps for 5-zone air suction of the vacuum table. With respective control buttons, a pedal switch makes it capable reverse air blowing function for lifting the heavy medias easily(Optional). The Honey-Comb table and internal air pipe ducts for efficient and powerful distribution of vacuum effect.
Guide Rail & Metal Liner Raser
Equipped with linear motor in higher precision, efficiency and stability, Japanese THK silent guide rail and X axial metal raster ensures straight carriage moving to achieve accurate printing and posibility of high driving speed. Y Asix is driven by dual Delta motor belt system with Metal raster, which can control deviation within 1um.
Carriage Transport System
With advanced Automatic Height Detector, it can detect the material thickness and find a good height position for best quality printing. Anti-Crash and continue print system can protect print head from crash and save media and time by continue printing. Thanks to the high-precision impact sensors on both sides of the head transport mechanism, the print heads are not damaged from curled,swollen or surged materials. The mechanism has anti-static devices to prevent electrostatic effect that disrupts the image quality.
Ink Supply Unit
Automatic high-volume Ink Supply system ensures continuous printing. The white ink has automatic stirring and circulation system, which avoids the clog of white printhead. This system continuously circulates the ink between Sub Ink Tank, Main tank and internal main tank. It's equipped with Ink low level sensor, which can give users alarm once ink level is below than setting.
Can print on up to 100mm thick substrates and the printing distance between the table and printhead can be raised more up to 200mm with an optional adaptor to print on thicker materials. It is possible to print on heavy substrates up to 100kg weight.
ONYX RIP Center is a standard software for Kyocera engine, which provides the control and simplicity need to get start in wide-format print production and achive consistent high-quality output. The versatile tools in ONYX RIP Center software make it easy to prepare jobs and produce sellable prints faster.
With advanced RIP technology, the user can get smooth gradients, vivid images and very clear small size text. The ICC color management workflow provides vibrant and bright colors.
DOCAN · Shanghai